EBII Pedalboard System Review – Simplify Your Pedal Setup!

In this “EBII Pedalboard System” review, I’ll explain the differences between this board and traditional setups and how the EBII will let you reconfigure the audio signal glide through your pedals with minimal hassle.

All of us who have used a pedalboard have had the frustrating level of changing or rearranging our pedals, which means un-attaching them from the board and re-attaching them in conjunction with their patch twine and strength cables. It could be time-consuming and worrying, mainly when you have a massive board!

An organization known as “Rare Earth Music” decided to change all that with their magnetic pedalboard systems. Their unique product makes reconfiguring your pedalboard an easy and painless procedure! Study directly to research extra!

What Is The Earthboard EBII Pedalboard System?

The Earthboard EBII is “Rare Earth Music’s” second-generation pedalboard. It is a double-row board. It’s the best pedalboard layout with magnets to attach and electricity your pedals. The EBII Pedalboard System can hold as many as 11 pedals plus the battery pack or 12 pedals using a strength adaptor or the battery pack plugged into the facet of the board.

Dimensions: L:20″ W:12.5″ H: approx. 5″ (at the highest point).
Weight: Approximately 9 pounds fully assembled(EBII + GravityBoots).

Who Is The EBII For?

This pedalboard is for guitar gamers who use multiple outcomes pedals and like to reconfigure their board regularly. Reflect on consideration of it. What if you decide to change the positions of your overdrive pedal and distortion booster to get a specific sound while you operate both with your phaser? What could you give to disconnect the audio patch cords and lift them right off the board?

Top guitar gamers finally collect more pedals than their board can accommodate. As a result, they become sitting around collecting dust because it’s too much of a problem to make the switch. The EBII is the answer to this trouble.

How The EBII Pedalboard System Works

Every consequences pedal attaches to a small board referred to as a “gravity boot,” which contains the circuitry required to electricity the pedal through four rare earth magnets that connect to a hard and fast of electrically charged (low voltage) zinc-lined steel rails.

Using a ” gravity tether, ” the gravity boot brings electricity into the pedal using a “gravity tether.” This design makes each pedal a self-contained unit that can be magnetically attached anywhere on the board.

Here’s an Earthboard video demonstrating how EBII and EBII-SR Pedalboard System works.

Features And Benefits

Some features and benefits of the Earthboard EBII Pedalboard System are given below.

New Features Of The EBII (Second-Generation) Pedalboard

• New wedge-formed layout
• Lighter than the first-technology model
• Stepped forward illumination
• Incorporated battery port – lets the battery be plugged into the left facet of the board to make room for an extra pedal.
• Two electricity Ports in every aspect – have three different capabilities:
  • Connects the 3Amp AC adaptor (the “strength Station”) to the pedalboard
  • Every port can strengthen a further pedal at the floor through a “lifeline tether” (connector)
  • Each port can connect with and power every other EBII Pedalboard System through a lifeline tether (3 pedalboards on an unmarried battery)
• Pass Board Patch Cable – runs along the inner of the pedalboard and connects the pinnacle and backside rows of pedals

What You Get With The EBII Pedalboard System

• Nine Gravity Boots (holds eight pedals and the battery)
• Eight Gravity Boot Tethers (connecting cables to convey electricity from the gravity boots to the pedals)
• 1 Battery Tether (brings energy to the pedalboard)
• Nine-Volt rechargeable battery p.C. With a USB charging cable (improve to the elective XL Battery for $50)
• AC “electricity Station” three Amp adaptor($25) and Lifeline Tether ($20) are sold separately
• “ISO Boots” are to be had ($35 each) to power 12, 15, and 18 Volt “unique need” pedals.
• A “semi-difficult” EBII sporting case is available for $250.

Benefits

• The EBII Pedalboard System comes with everything you want to add, as many as nine pedals (with the battery plugged into the side battery port).
• It has a compact size (L: 20″ W: 12.Five″ H: approx. 5″ at highest factor)
• It has a lightweight layout (EBII + Gravity Boots: 9 lbs)
• It is easy to portable.

What Is The EBII-SR?

The Earthboard EBII-SR is the single-row version of the EB-II. It has all of the functions of the original Earthboard plus 2 Battery Port input Jacks, two strength Port input/Output Jacks, and integrated Blue LED lights. It is a more compact and affordable version of the EBII Pedalboard System.

About EBII-SR:

• Dimensions: L: 20″ W: 7″ H: approx. Four″ (at the very best factor).
• Weight: about 6 kilos fully assembled (EBII + Gravity Boots).
• Rate: $334.00
• A smooth case for the EBII-SR is to be had: $130

The Earthboard EBII-SR comes with the following:

• 5 Gravity Boots (holds four pedals and the battery)
• Four Gravity Boot Tethers
• 1 Battery Tether
• 9-Volt rechargeable battery percent with a USB charging cable (upgrade to the non-obligatory XL Battery for $50)

What I Like About The Earthboard EBII Pedalboard System

The facts I liked about the “Earthboard EBII Pedalboard System” are given here.

Quick And Easy Setup

The EBII Pedalboard device is straightforward to set up. You could assemble it with 12 pedals in underneath 30 minutes. The magnetic gravity boots make reconfiguring the order of the pedals or swapping one out for some other easy and short enough to do at some stage in a stay gig.

If you need to interchange out a pedal, detach it from the gravity boot and clutch some other one (with pre-connected Velcro) to re-attach in its place. You can buy extra gravity boots ($25 each) for all of your pedals to make the procedure even quicker if you have the money.

Pedalboard Frame Lighting

The EBII Pedalboard machine has very cool LED lighting. While strength is provided to the board, the frame emits a mild blue that lets you notice your pedals within the darkish and illuminates the Earthboard logo.

A far flung-controlled “multi-coloured” body is to be had in case you need to make your pedalboard appearance outstanding. The lighting fixtures make the pedalboard look professional and indicate that the board is well-powered.

Durable

The EBII pedalboard is hand-crafted from “aircraft-grade” aluminium with zinc-lined rails. It has 4 full rubber ft to keep it from slipping during use and electrically isolate it from the floor. This frame ought to, without difficulty, keep up with the daily abuse of even the maximum aggressive pedal stompers.

Versatile

The EBII pedalboard will easily accommodate pedals of any length and form, using a “dummy boot” ($22) to help anchor your larger-length pedals to the board.

For the guitarists that need to install their pedals more permanently to the board, the gravity boots come with pre-drilled holes to ease each pedal with three zip ties. As a phrase of caution, make certain to comply with the setup commands to avoid the negative velcro pad at the gravity boot.

Electrical Isolation

If you have a pedal that needs to be electrically remoted from the other pedals for your board or has special voltage requirements, you should purchase an “Iso Boot.” they come in 12, 15, and 18 Volt configurations. If you require an exclusive voltage, you can contact the corporation directly for a custom-designed iso boot.

Made In The USA

All Earthboard products are made with satisfaction within the u.S.A., and the organization is veteran-owned. I am a large fan of yank-made merchandise. As an American, I’m usually keen to aid our Vets, who have given so much to our united states!

Customer Service

A bit of study into client evaluations and testimonials verifies that the customer support at uncommon Earth song is pinnacle-notch. Questions and product problems are addressed speedy, with politeness, and expertly. That is crucial to me, especially while investing in an excessive-cease gadget.

Awards

Rare Earth Music exhibited its Earthboard merchandise at the 2019 NAMM display, and the effects were very favourable. They won a 2019 Guitar participant’s high-quality New tools Award and a 2019 tune Inc. Editor’s choice award!

Potential Problems With The Earthboard EBII

It is a fantastic pedalboard with a modern pedal attachment machine. There’s not plenty to dislike about the board. The pedalboard of this fine and characteristic is predictably high priced, which can place it out of the attain of many, if not maximum, non-expert guitar players.

The EBII-SR is a single-rale pedalboard that may be a cheaper alternative with equal incredible pleasure. You can constantly buy an EBII and connect it to the EBII-SR. There had been a few reviews of the energy supply being noisy at some stage in pedalboard electricity-up. It will be related to negative electric grounding.

Users have commented that they would love a selection of different-length Gravity boots for larger pedals. Rare Earth track does promote a “dummy boot” ($22 every) to deal with your extra-huge stompboxes. However, it’s miles strictly for structural support, so it no longer has the circuitry for an electrical connector.

A discharged battery normally takes about 4 to 6 hours to recharge, so you must keep in mind to hold it charged or buy a 2nd battery or AC power adaptor.

The EBII battery is higher built than the maximum pedalboard batteries I’ve visible, so it is not especially a problem, simply something to be aware of. Further, it comes with a battery stage indicator to help you understand when you are in danger of walking out of juice.

Read All The Setup Directions Carefully

Certain processes should be accompanied while putting in place your EBII Pedalboard device. For instance, while attaching an ISO Boot or Gravity Boot to the pedalboard rales, align the purple toes at the rail with the purple dot to avoid destroying the boots’ circuitry. DC strength has a constant polarity, so that is difficult to be taken into consideration with any pedalboard setup.

Final Thoughts On The EBII Pedalboard System

The EBII pedalboard machine is a revolutionary design and the sector’s only magnetic attachment and energy transport unit. Setup could not be easier; add the pedals and audio patch cables.

It may be the most uncluttered pedalboard without the standard daisy chain of strength cords! The modular layout of the EBII allows you to recognition to your song, not your pedalboard configuration.

In case you’re in the market for a low-cost pedalboard, then the EBII might not be for you, but I endorse you. Check it out to peer if you may justify the price tag. The exceptional capability of this unit might also have you pulling out your credit card.

Share Your Thoughts with us!

FAQs